Follow these steps to change your HASLAB Proton Pack modes:
1. Unscrew the large silver knob on top of your cyclotron.
2. Remove the knob and bumper around your cyclotron.
3. Remove all removable cables from the cyclotron lid.
4. Remove the cyclotron lid.
5. Inside there are two switches (one controls the vibration motor, the other controls the Afterlife mode vs 1984 Classic mode), set these as you prefer.
6. Reinstall the cyclotron lid, removable cables, bumper and silver knob. Note: If the cyclotron lid is not properly installed, the red ON switch will not power the pack on.
